Skip to content

PRO-TW820 DS18 2.3" Neodymium Super Bullet Tweeter | 100W Program, 200W Peak, 4-Ohm – Single

by DS18
Sold out
Original price $89.99
Original price $89.99 - Original price $89.99
Original price $89.99
Current price $69.95
$69.95 - $69.95
Current price $69.95
Availability:
Out of stock

High-Output Highs for Serious PRO Audio Systems

Bring crisp, powerful high-frequency sound to your car, truck, motorcycle, or custom speaker setup with the DS18 PRO-TW820 2.3-inch High-Compression Neodymium Super Bullet Tweeter.

Designed for high-output PRO Audio systems, the PRO-TW820 combines a lightweight aluminum diaphragm, powerful neodymium magnet, and precision aluminum bullet design to deliver impressive high-frequency projection from a compact package.

With 105dB sensitivity, 4-ohm impedance, and 200 watts peak power handling, this tweeter is built for systems where clarity and output matter.

Its adjustable mounting design gives installers flexibility for custom door panels, motorcycle fairings, dashboards, and speaker pods. The serviceable construction also allows the diaphragm to be replaced using the compatible DS18 PRO-TW820VC replacement component.

Whether you're adding high-frequency detail to an existing midrange system or building a custom PRO Audio setup, the PRO-TW820 delivers the efficiency and projection needed to keep your highs present as the volume increases.

Why You'll Love It

  • 2.3" High-Compression Super Bullet Tweeter

  • 50W AES / 100W Program / 200W Peak Power

  • 4-Ohm Nominal Impedance

  • 105dB Sensitivity

  • Neodymium Magnet

  • 1" Aluminum Diaphragm

  • 1" Voice Coil

  • Precision Aluminum Bullet Design

  • 700Hz–20kHz Published Frequency Response

  • Recommended 3kHz High-Pass Crossover

  • Adjustable Mounting Configuration

  • Replaceable Diaphragm

  • Sold Individually


Perfect For

  • High-output car audio systems

  • Custom PRO Audio door panels

  • Motorcycle audio installations

  • Custom speaker pods

  • Dedicated midrange and tweeter systems

  • Show-style audio builds

  • Customers upgrading high-frequency output

Product Overview

High-Efficiency Neodymium Performance

The PRO-TW820 uses a compact neodymium motor to deliver strong high-frequency output without requiring an oversized magnet assembly.

Its 105dB sensitivity makes it particularly useful for loud speaker systems where the tweeters need to remain audible alongside powerful midrange drivers.

Aluminum Diaphragm and Bullet Design

The aluminum diaphragm provides a lightweight, responsive surface for high-frequency reproduction.

Combined with the aluminum bullet structure, the tweeter is designed to project upper-frequency detail with strong presence.

Adjustable Mounting for Custom Installations

The PRO-TW820 features an adjustable mounting arrangement with an aluminum mounting ring and rubber gaskets.

This gives installers flexibility when positioning the tweeter in custom panels or speaker pods.

Always verify the cutout, available mounting depth, and front clearance before installation.

Serviceable Construction

The PRO-TW820 is compatible with the DS18 PRO-TW820VC replacement diaphragm, allowing the diaphragm to be serviced without replacing the entire tweeter assembly.


Key Features

  • High-compression super bullet tweeter

  • 2.3-inch nominal tweeter design

  • 50 watts AES power handling

  • 100 watts program power handling

  • 200 watts peak power handling

  • 4-ohm impedance

  • 105dB sensitivity

  • 700Hz–20kHz frequency response

  • Recommended 3kHz high-pass crossover

  • 1-inch voice coil

  • Kapton voice-coil former

  • CCA voice-coil winding

  • Aluminum diaphragm

  • Neodymium magnet

  • Aluminum body

  • Adjustable mounting depth

  • Compatible with PRO-TW820VC replacement diaphragm

  • Sold individually


Technical Specifications

Brand: DS18

Model: PRO-TW820

Product Type: High-Compression Super Bullet Tweeter

Nominal Diameter: 2.3"–3"

Nominal Impedance: 4 Ohms

AES Power Handling: 50 Watts

Program Power Handling: 100 Watts

Peak Power Handling: 200 Watts

Sensitivity (1W/1m): 105 dB

Frequency Response: 700Hz–20kHz

Recommended High-Pass Crossover: 3kHz

Motor and Diaphragm

Voice Coil Diameter: 1" / 25.4mm

Voice Coil Former: Kapton

Voice Coil Winding: CCA

Diaphragm Material: Aluminum

Magnet Material: Neodymium

Body Material: Aluminum

Dimensions

Overall Diameter: 2.28" / 58mm

Overall Depth: 2.67" / 68mm

Front Mount Cutout: 1.69" / 43mm

Adjustable Mounting Depth: 1.65"–2.55" / 42–65mm

Sold As: Single Tweeter


Recommended Crossover

DS18 recommends a 3kHz high-pass crossover for the PRO-TW820.

Although its published frequency response extends down to 700Hz, this does not mean the tweeter should be operated full-range or crossed over at 700Hz.

Use appropriate crossover protection to prevent damaging lower-frequency energy from reaching the diaphragm.

Pro Audio Center Expert Recommendation

The DS18 PRO-TW820 is a strong choice for customers building high-output systems with dedicated midrange speakers and tweeters.

Its 105dB sensitivity makes it especially attractive when you need high-frequency output that can keep up with powerful door speakers.

For best results, pair it with properly crossed-over midrange drivers, clean amplifier power, and careful gain adjustment. The goal is strong, clear highs that complement the rest of your system without becoming harsh or overpowering.

What's Included

  • (1) DS18 PRO-TW820 High-Compression Neodymium Super Bullet Tweeter

Sold individually, not as a pair. Order quantity 2 if your installation requires two tweeters.


What These Tweeters Pair Best With

The DS18 PRO-TW820 is designed to complement high-output midrange speakers in custom PRO Audio systems.

Unlike a coaxial speaker, the PRO-TW820 is a dedicated high-frequency driver. It should be paired with speakers capable of reproducing the midrange and lower frequencies.

Recommended Speaker Pairings

DS18 PRO-X6.4M 6.5" Midrange Speakers

An excellent combination for customers building high-output door panels with separate midrange and tweeter locations.

DS18 PRO-X8.4M 8" Midrange Speakers

A strong option for larger custom installations where high-output midrange speakers need equally capable high-frequency drivers.

DS18 PRO-X6.4BMSL Slim Midrange Speakers

A practical pairing for installations with limited mounting depth, including custom doors and compact speaker pods.

Recommended System Configuration

For a typical two-speaker front-stage setup:

  • (2) DS18 PRO-TW820 Tweeters

  • (2) Compatible DS18 PRO Audio Midrange Speakers

  • Properly matched full-range amplifier

  • Active or passive crossover protection

  • Quality OFC speaker wire

For larger systems, additional tweeters and midrange speakers can be added based on the amplifier configuration and desired sound coverage.


Recommended Amplifier Setup

The PRO-TW820 is rated for:

  • 50 Watts AES

  • 100 Watts Program

  • 200 Watts Peak

  • 4-Ohm Impedance

For dedicated tweeter channels, a quality full-range amplifier capable of delivering approximately 50 watts RMS per channel at 4 ohms is a practical starting point.

Amplifiers with higher output can also be used when properly configured, but gain adjustment and crossover protection become especially important.

Important: Do not choose an amplifier based solely on the 200-watt peak rating.

The goal is clean, controlled high-frequency output—not maximum amplifier wattage.


Recommended Crossover Setup

DS18 recommends a 3kHz high-pass crossover for the PRO-TW820.

Recommended Starting Point

High-Pass Filter: 3,000Hz

The high-pass crossover prevents lower-frequency energy from reaching the tweeter, helping protect its diaphragm and voice coil.

Although the published frequency response extends down to 700Hz, that does not mean the tweeter should be operated at that frequency under high power.

Active Crossover Systems

For systems using a DSP or amplifier with suitable high-frequency crossover controls, the PRO-TW820 can be assigned its own tweeter channels.

This provides greater control over crossover frequency, output level, and system balance.

Passive Crossover Systems

If your amplifier or source does not provide suitable tweeter crossover control, use an appropriately designed passive high-pass network.

The correct crossover components depend on impedance, crossover frequency, slope, and intended power.

Never connect the PRO-TW820 directly to a full-range amplifier output without appropriate crossover protection.


Popular Build Applications

High-Output Car Audio Door Panels

The PRO-TW820 is a natural choice for custom door panels using multiple midrange speakers and dedicated tweeter locations.

Its high sensitivity allows it to produce strong upper-frequency output alongside powerful PRO Audio midranges.


Custom Speaker Pods

For customers building custom speaker pods, the PRO-TW820 provides dedicated high-frequency reproduction in a relatively compact mounting footprint.

Always verify the required cutout, depth, and front clearance before fabrication.


Motorcycle Audio Systems

The compact neodymium design makes the PRO-TW820 a potential option for protected custom motorcycle audio installations.

However, the PRO-TW820 is not specified as waterproof or marine-rated. Avoid locations where it will be exposed directly to rain, washdown, or significant moisture.


Multi-Speaker PRO Audio Builds

For systems using four, six, or more midrange speakers, properly positioned tweeters can help maintain high-frequency presence as overall system output increases.

The correct number of tweeters depends on speaker sensitivity, placement, system tuning, and listening preferences.

Adding more tweeters does not automatically produce better sound. Proper system balance is essential.


Installation Notes

Before installation:

  • Verify the 1.69-inch (43mm) front mounting cutout.

  • Confirm the available mounting depth accommodates the adjustable mounting assembly.

  • Check front clearance around the aluminum bullet.

  • Secure the tweeter using the appropriate mounting hardware.

  • Observe correct speaker polarity.

  • Use suitable high-pass crossover protection.

  • Verify the amplifier's 4-ohm load compatibility.

  • Set amplifier gain correctly.

  • Route wiring away from moving components and sharp edges.

  • Protect the tweeter from direct water exposure.

  • Test the complete system before reinstalling trim panels.

For custom door panels, consider window clearance, door movement, vibration, and available space behind the mounting surface.


Pro Audio Center Tip

One of the biggest mistakes when installing high-output bullet tweeters is overpowering them or allowing too much lower-frequency energy to reach the diaphragm.

The PRO-TW820 already has an impressive 105dB sensitivity rating, meaning it can produce substantial output without requiring excessive amplifier power.

Start with the manufacturer's recommended 3kHz high-pass crossover, use clean amplifier power, and carefully balance the tweeter level against your midrange speakers.

A properly tuned system should sound loud and detailed without becoming harsh or fatiguing.


Complete Your PRO Audio System

Depending on your installation, consider adding:

  • DS18 PRO Audio midrange speakers

  • Full-range multi-channel amplifier

  • DSP or active crossover

  • Appropriate passive tweeter crossovers

  • OFC speaker wire

  • Amplifier wiring kit

  • Custom speaker pods

  • Speaker mounting accessories

  • Sound deadening

  • Dedicated subwoofer system

For customers building a complete system, matching the midrange speakers, tweeters, amplifier channels, and crossover settings before installation can prevent unnecessary wiring changes later.


Why Buy From Pro Audio Center?

Building a high-output audio system requires more than choosing speakers with impressive power ratings.

Tweeter sensitivity, impedance, crossover frequency, amplifier power, and mounting location all influence how the finished system performs.

At Pro Audio Center, we help customers select components that work together properly so their system delivers strong output without sacrificing clarity or reliability.


Frequently Asked Questions

Is the DS18 PRO-TW820 sold individually or as a pair?

The PRO-TW820 is sold individually.

If your installation requires two tweeters, order quantity 2.


How much power does the PRO-TW820 handle?

Each tweeter is rated for:

  • 50 Watts AES

  • 100 Watts Program

  • 200 Watts Peak

For amplifier matching, focus on continuous power handling and proper crossover protection rather than peak wattage.


Is the PRO-TW820 a 4-ohm tweeter?

Yes.

The PRO-TW820 has a 4-ohm nominal impedance.


What crossover should I use?

DS18 recommends a 3kHz high-pass crossover.

This is the recommended starting point for protecting the tweeter from lower-frequency signals.


Can I run these tweeters without a crossover?

No. We do not recommend operating the PRO-TW820 without appropriate high-pass crossover protection.

Sending full-range audio directly to the tweeter can damage its diaphragm or voice coil.


Can I connect these directly to my car radio?

Only if the installation includes suitable high-pass filtering and the radio can safely drive the connected load.

For most custom PRO Audio systems, a properly configured external amplifier or DSP-controlled setup is preferable.


Do I need an amplifier?

Not necessarily, but an appropriately matched amplifier provides greater control over output and integration with other high-performance speakers.

Proper crossover protection is required regardless of the power source.


Are these good for custom door panels?

Yes.

The PRO-TW820 is well suited for custom speaker panels with dedicated tweeter mounting locations, provided the available space and mounting dimensions are compatible.


Can I use these on a motorcycle?

They can be used in protected custom motorcycle installations, but the PRO-TW820 is not specified as waterproof.

Avoid direct exposure to water and moisture.


Can I pair these with 6.5-inch or 8-inch midrange speakers?

Yes.

The PRO-TW820 is designed to complement compatible midrange drivers in multi-speaker PRO Audio systems.

The crossover and output levels should be adjusted to create a balanced sound.


Will these produce bass?

No.

The PRO-TW820 is a dedicated high-frequency tweeter. Midrange speakers and subwoofers are responsible for reproducing the lower frequencies.


Can I replace the diaphragm?

Yes.

The PRO-TW820 is compatible with the DS18 PRO-TW820VC replacement diaphragm.


How large is the mounting cutout?

The manufacturer specifies a 1.69-inch (43mm) front mounting cutout.

Always verify the complete mounting assembly and available clearance before installation.


Are these waterproof?

No waterproof or marine IP rating has been established for the PRO-TW820.

For exposed marine or powersports applications, choose a speaker specifically designed for the expected environmental conditions.