Skip to content

PRO-HY6.4B DS18 6.5" Hybrid PRO Audio Speaker with Built-In Compression Driver | 225W RMS 4-Ohm | Single Speaker

by DS18
Sold out
Original price $139.99
Original price $139.99 - Original price $139.99
Original price $139.99
Current price $114.95
$114.95 - $114.95
Current price $114.95
Availability:
Out of stock

Big PRO Audio Sound. Midrange and Highs in One Speaker.

Get the aggressive output of a PRO Audio midrange and the crisp high-frequency projection of a compression driver without needing two separate speaker locations.

The DS18 PRO-HY6.4B combines a powerful 6.5-inch midrange speaker with a built-in 1-inch titanium compression driver and integrated horn, creating a high-output 2-way loudspeaker designed for demanding car audio, motorcycle, and custom speaker installations.

Rated for 225 watts RMS and 450 watts maximum power at 4 ohms, the PRO-HY6.4B delivers the power handling needed for serious amplified systems.

Its 96dB sensitivity helps produce strong output with properly matched amplifier power, while its water-resistant cone and IPX5 rating make it an attractive option for installations where occasional exposure to water or spray may occur.

Whether you're building custom motorcycle speaker pods, upgrading a high-output door speaker system, or putting together a multi-speaker PRO Audio setup, the PRO-HY6.4B brings powerful vocals and detailed highs together in one compact speaker assembly.


Why You'll Love It

✔ 6.5" Hybrid 2-Way PRO Audio Loudspeaker

✔ 225 Watts RMS / 450 Watts Maximum Power

✔ 4-Ohm Nominal Impedance

✔ Built-In 1" Titanium Compression Driver

✔ Integrated 3" High-Frequency Horn

✔ 96dB Sensitivity

✔ 100Hz–20kHz Frequency Response

✔ IPX5 Water-Resistance Rating

✔ Water-Resistant Paper Cone

✔ Heavy-Duty Aluminum Basket

✔ Gloss Red Basket Finish

✔ Ferrite Woofer and Neodymium Driver Magnets

✔ Recommended 120Hz High-Pass Crossover

✔ Replaceable Compression Driver Diaphragm

✔ Protective Speaker Grille Included

✔ Sold Individually


Perfect For

  • High-output car audio systems

  • Custom door speaker installations

  • Motorcycle audio upgrades

  • Custom motorcycle speaker pods

  • High-output saddlebag speaker systems

  • PRO Audio door panels

  • Custom speaker enclosures

  • Multi-speaker audio builds

  • Protected powersports installations

  • Customers wanting midrange and highs without separate tweeters


Product Overview

The DS18 PRO-HY6.4B is designed for customers who want more output than a conventional 6.5-inch coaxial speaker can typically provide.

Traditional PRO Audio systems often require separate midrange speakers and bullet tweeters or compression drivers to achieve the desired balance of powerful vocals and high-frequency projection.

The PRO-HY6.4B combines both functions into a single 6.5-inch speaker.

Its dedicated midrange woofer handles the body and presence of your music, while the integrated titanium compression driver reproduces the upper frequencies.

This design is especially useful in custom installations where speaker space is limited or where installing separate tweeters would add unnecessary complexity.

With 225 watts RMS power handling and 96dB sensitivity, the PRO-HY6.4B is built to deliver impressive output when paired with a properly configured amplifier.


Built-In Titanium Compression Driver

One of the biggest advantages of the PRO-HY6.4B is its integrated high-frequency compression driver.

Rather than relying on a conventional small coaxial tweeter, this speaker uses a 1-inch titanium diaphragm compression driver paired with a 3-inch horn.

This design helps project high-frequency sound with the clarity and output needed to complement the powerful midrange section.

Titanium Diaphragm

The titanium diaphragm provides a lightweight, rigid surface designed for responsive high-frequency reproduction.

Neodymium Magnet

The compression driver uses a compact neodymium magnet to provide strong motor performance without excessive size.

Integrated Horn

The 3-inch horn helps direct high-frequency sound outward, making the speaker especially useful for high-volume and open-air listening environments.

For customers building loud motorcycle or custom car audio systems, this integrated design can eliminate the need for separate tweeter mounting locations.


High-Output 6.5" Midrange Performance

The PRO-HY6.4B features a dedicated 6.5-inch midrange woofer designed to reproduce powerful vocals, instruments, and musical presence.

Its 1.5-inch voice coil, ferrite magnet, and heavy-duty aluminum basket provide the foundation for its 225-watt RMS power rating.

The water-resistant paper cone and cloth surround help support reliable performance in demanding installations.

With 96dB sensitivity, the PRO-HY6.4B can deliver strong output without requiring excessive amplifier power.

That efficiency is particularly useful in custom motorcycle audio and multi-speaker systems where volume and projection are priorities.


Water-Resistant Construction for Demanding Installations

The PRO-HY6.4B features a water-resistant paper cone with IPX5-rated construction, making it suitable for applications where the speaker may encounter occasional water spray.

This makes it attractive for:

  • Custom motorcycle audio systems

  • Protected powersports installations

  • Custom speaker pods

  • Outdoor-oriented recreational audio builds

The speaker also features a durable aluminum basket with a distinctive gloss red finish.

Important: IPX5 provides resistance to water jets under specified conditions. The PRO-HY6.4B is not designed for submersion and should not be treated as a fully waterproof marine speaker.

Proper installation and protection of electrical connections remain important.


225 Watts RMS of PRO Audio Power

The PRO-HY6.4B is designed for customers who need serious output from each speaker location.

Power Handling

225 Watts RMS

450 Watts Maximum

4-Ohm Impedance

For a typical two-speaker installation, a quality full-range amplifier producing approximately 175–225 watts RMS per channel at 4 ohms is a practical match.

For larger systems using four or more speakers, select an amplifier configuration that provides suitable power while maintaining safe impedance loads.

Proper gain adjustment and crossover settings are essential for reliable operation.


Recommended 120Hz High-Pass Crossover

DS18 recommends a 120Hz high-pass crossover for the PRO-HY6.4B.

A high-pass filter reduces the deepest bass frequencies reaching the woofer, allowing the speaker to concentrate on vocals, instruments, and high-frequency detail.

This becomes particularly important when using substantial amplifier power.

For a more complete audio system, pair the PRO-HY6.4B with a dedicated subwoofer to handle deep bass.


Key Features

  • 6.5" Hybrid 2-Way PRO Audio Loudspeaker

  • Integrated 1" Titanium Compression Driver

  • Built-In 3" High-Frequency Horn

  • 225 Watts RMS Power Handling

  • 450 Watts Maximum Power Handling

  • 4-Ohm Nominal Impedance

  • 96dB Sensitivity

  • 100Hz–20kHz Frequency Response

  • Recommended 120Hz High-Pass Crossover

  • 1.5" Midrange Voice Coil

  • Water-Resistant Paper Cone

  • Cloth Surround

  • Heavy-Duty Aluminum Basket

  • Gloss Red Basket Finish

  • 27 oz Ferrite Woofer Magnet

  • Neodymium Compression Driver Magnet

  • IPX5 Water-Resistance Rating

  • Replaceable Compression Driver Diaphragm

  • 3.92" Mounting Depth

  • Protective Speaker Grille Included

  • Sold Individually


Technical Specifications

Brand: DS18

Series: PRO Hybrid

Model / SKU: PRO-HY6.4B

Speaker Size: 6.5" / 165.1mm

Speaker Type: 2-Way Hybrid PRO Audio Loudspeaker

Nominal Impedance: 4 Ohms

RMS Power Handling: 225 Watts

Maximum Power Handling: 450 Watts

Sensitivity (1W/1m): 96dB

Frequency Response: 100Hz–20kHz

Recommended High-Pass Crossover: 120Hz

Number of Ways: 2

Water-Resistance Rating: IPX5

Grille Included: Yes

Sold As: Single Speaker

Woofer Specifications

Voice Coil Diameter: 1.5" / 38.6mm

Voice Coil Former: Glass Fiber

Voice Coil Winding: CCAW

Cone Material: Water-Resistant Paper

Surround Material: Cloth

Basket Material: Aluminum

Basket Finish: Gloss Red

Magnet Material: Ferrite

Magnet Weight: 27 oz.

Displacement Volume: 0.047L / 0.0016 ft³

Compression Driver Specifications

Driver Voice Coil: 1" / 25.4mm

Voice Coil Former: Kapton

Voice Coil Winding: CCAW

Diaphragm Material: Titanium

Magnet Material: Neodymium

Horn Diameter: 3" / 76.2mm

Replacement Diaphragm: DS18 PRO-HY/VC

Thiele & Small Parameters

Free-Air Resonance (Fs): 199Hz

Equivalent Compliance Volume (Vas): 2.21L / 0.078 ft³

Total Q (Qts): 1.214

Electrical Q (Qes): 1.524

Mechanical Q (Qms): 5.96

One-Way Excursion (Xmax): 9.2mm

Moving Mass (Mms): 8.654g

Mechanical Compliance (Cms): 73.792mm/N

BL Factor: 4.769

Voice Coil Inductance (Le): 4.22mH

Cone Area (Sd): 145.26cm²

DC Resistance (Re): 3.2 Ohms

Mechanical Mass Without Air (Mmd): 6.70g

Speaker Dimensions

Overall Diameter: 6.85" / 174mm

Overall Depth: 4.28" / 108.8mm

Front Mount Cutout: 5.91" / 150mm

Mounting Depth: 3.92" / 99.5mm

Motor Diameter: 4.65" / 118mm

Grille Included: Yes

Sold As: Single Speaker

What's Included

  • (1) DS18 PRO-HY6.4B 6.5" Hybrid PRO Audio Loudspeaker

  • Integrated 1" Titanium Compression Driver and 3" Horn

  • Protective Speaker Grille

Sold individually, not as a pair. Order quantity 2 if your installation requires two speakers.

Recommended Crossover Setup

DS18 recommends a 120Hz high-pass crossover for the PRO-HY6.4B.

Recommended Starting Point

High-Pass Filter: 120Hz

A high-pass filter reduces the deepest bass frequencies reaching the woofer, allowing the speaker to concentrate on vocals, instruments, and high-frequency detail.

This is particularly important when using substantial amplifier power.

Popular Build Applications

Motorcycle Audio Systems

The PRO-HY6.4B is an excellent option for customers building high-output motorcycle audio systems.

Its combination of 225 watts RMS power handling, 96dB sensitivity, and an integrated compression driver makes it particularly attractive for installations where strong sound projection is important.

The built-in horn helps deliver high-frequency detail without requiring separate tweeter locations.

Its IPX5 water-resistance rating also provides additional protection against water spray.

However, the 3.92-inch mounting depth means it is not a shallow-mount speaker.

Always verify the available space before purchasing.


Custom Motorcycle Fairings

For motorcycles with custom fairings or aftermarket speaker pods, the PRO-HY6.4B can provide powerful midrange and high-frequency output from one speaker location.

Before installation, verify:

  • Fairing or speaker pod compatibility

  • Available mounting depth

  • Speaker cutout diameter

  • Magnet clearance

  • Grille clearance

  • Mounting hardware

  • Electrical system capacity

Some installations may require custom fabrication or deeper mounting pods.


Motorcycle Saddlebags

The PRO-HY6.4B is also an attractive option for custom saddlebag audio systems.

Its integrated compression driver simplifies installation by eliminating the need for a separate tweeter mounting location.

The speaker's water-resistant construction is another advantage for motorcycle applications.

For best results, use secure mounting, protected electrical connections, and appropriate speaker enclosures.


High-Output Car Audio Doors

For customers building loud door speaker systems, the PRO-HY6.4B provides substantially more power handling than many conventional factory-replacement coaxial speakers.

Its compression driver adds strong high-frequency projection while the midrange woofer handles vocals and instruments.

However, its 3.92-inch mounting depth may exceed the available space in many factory door locations.

Always check window clearance, speaker mounting depth, and available grille space.


Custom Speaker Pods

The PRO-HY6.4B is an excellent candidate for custom speaker pods and panels where maximum output is the priority.

Its hybrid design combines midrange and high-frequency reproduction in one assembly, reducing the need for separate tweeter mounting locations.


Multi-Speaker PRO Audio Systems

For larger systems using four or more speakers, the PRO-HY6.4B provides a convenient way to achieve strong midrange and high-frequency output without installing separate bullet tweeters.

Why Buy From Pro Audio Center?

Building a high-output audio system involves more than choosing speakers with impressive wattage ratings.

Speaker impedance, amplifier power, mounting depth, crossover settings, and installation environment all influence how the finished system performs.

At Pro Audio Center, we focus on helping customers choose the right combination of speakers, amplifiers, and installation accessories so they can build a system that delivers the output and reliability they expect.


Frequently Asked Questions

Is the DS18 PRO-HY6.4B sold individually or as a pair?

The PRO-HY6.4B is sold individually.

If you need two speakers for a left-and-right installation, order quantity 2.


How much power does the PRO-HY6.4B handle?

Each speaker is rated for 225 watts RMS and 450 watts maximum power.

For amplifier matching, focus primarily on the RMS rating.


Is the PRO-HY6.4B a 4-ohm speaker?

Yes.

The PRO-HY6.4B has a 4-ohm nominal impedance.


Does this speaker have a built-in tweeter?

Yes.

It features an integrated 1-inch titanium compression driver with a 3-inch horn.

This provides high-frequency reproduction without requiring a separate external tweeter location.


Do I need separate tweeters?

Not necessarily.

The PRO-HY6.4B already includes a high-frequency compression driver.

Additional tweeters are generally unnecessary for a basic system using these speakers, although more complex custom systems may use additional high-frequency drivers.


What amplifier should I use?

For a typical installation, we recommend a quality full-range amplifier producing approximately 175–225 watts RMS per channel at 4 ohms.

Proper gain adjustment and crossover settings are essential.


Can I use these with a factory radio?

They may operate with compatible factory audio equipment, but a dedicated amplifier is recommended to achieve the high-output performance the PRO-HY6.4B is designed to provide.

Always verify factory impedance and amplifier compatibility.


What crossover should I use?

DS18 recommends a 120Hz high-pass crossover.

This helps reduce unnecessary low-frequency stress while allowing the speaker to concentrate on midrange and high-frequency reproduction.


Can these speakers produce bass?

They can reproduce some midbass and lower-frequency content, but they are primarily designed for high-output midrange and high-frequency performance.

For strong deep bass, we recommend adding a dedicated subwoofer.


Are these good for motorcycles?

Yes.

The PRO-HY6.4B is particularly well suited for compatible custom motorcycle installations because of its high output, integrated compression driver, and IPX5 water resistance.

Always verify mounting depth and speaker pod dimensions.


Are these waterproof?

The PRO-HY6.4B has an IPX5 water-resistance rating, which provides protection against water jets under specified test conditions.

It is not designed for submersion.


Will these fit my factory 6.5-inch speaker locations?

Possibly, but fitment must be verified.

The speaker requires 3.92 inches of mounting depth and a 5.91-inch mounting cutout.

Many factory speaker locations will require modifications or custom mounting adapters.


Can I install these in custom motorcycle saddlebags?

Yes, provided the speaker pods or saddlebag lids have sufficient clearance and appropriate mounting provisions.

The deeper basket and motor assembly make careful measurement especially important.


Are speaker grilles included?

Yes.

The PRO-HY6.4B includes a protective speaker grille.


Can I replace the compression driver diaphragm?

Yes.

The PRO-HY6.4B is compatible with the DS18 PRO-HY/VC replacement diaphragm, allowing the high-frequency driver to be serviced.


Can I run two speakers on one amplifier channel?

Potentially, provided the resulting impedance is supported by the amplifier and sufficient power is available.

Two 4-ohm speakers wired in parallel create a 2-ohm load.

Two 4-ohm speakers wired in series create an 8-ohm load.

Always verify amplifier stability and available power before wiring multiple speakers to one channel.