Skip to content

FRP-2.5K/TI DS18 2500W RMS Full-Range Monoblock Amplifier | Class D 1-Ohm Stable Car Audio Amp – Titanium

by DS18
Sold out
Original price $399.99
Original price $399.99 - Original price $399.99
Original price $399.99
Current price $279.96
$279.96 - $279.96
Current price $279.96
Availability:
Out of stock

Massive Power. Compact Design. Full-Range Performance.

Take your car audio system to the next level with the DS18 FRP-2.5K/TI Full-Range Monoblock Amplifier, a compact Class D powerhouse delivering up to 2,500 watts RMS at 1 ohm.

Whether you're building a high-output subwoofer system or powering a demanding pro audio speaker setup, the FRP-2.5K/TI delivers serious amplification in a space-saving design.

Unlike traditional monoblock amplifiers designed exclusively for subwoofers, this full-range Class D amplifier offers adjustable high-pass and low-pass crossover filters, giving you the flexibility to configure it for bass, midrange, or other compatible speaker applications.

Its titanium-colored chassis provides a distinctive appearance, while advanced protection circuitry, dual smart cooling fans, and an included remote level control with clipping indicator help you monitor and manage your system.

With 2,500W RMS at 1Ω, 1,300W RMS at 2Ω, and 700W RMS at 4Ω, this amplifier gives you the power and flexibility to build a serious high-performance audio system.

Sold individually. Speakers, subwoofers, and installation wiring are sold separately.


Why You'll Love It

  • 2,500 Watts RMS at 1 Ohm — Serious output for demanding high-power audio systems.

  • Full-Range Monoblock Design — Suitable for properly matched subwoofer, midrange, and other full-range applications.

  • Class D Amplification — High power output with an efficient, compact architecture.

  • 1-Ohm Stable — Supports speaker loads from 1 to 4 ohms.

  • Adjustable High-Pass & Low-Pass Filters — Configure the amplifier for different frequency ranges.

  • Remote Level Control Included — Adjust output level from the driver's seat.

  • Clipping Indicator — Helps identify excessive signal levels during tuning.

  • Dual Smart Cooling Fans — Active cooling for demanding installations.

  • Advanced Protection Circuitry — Includes thermal, short-circuit, overload, voltage, and clipping protection.

  • Compact Titanium Chassis — Distinctive finish with a small installation footprint.

  • 0-Gauge Power Input Terminal — Designed for high-current power connections.

  • Tiffany-Style RCA Connections — Quality low-level signal connections.


One Amplifier. Multiple Audio Applications.

The DS18 FRP-2.5K/TI stands apart from conventional subwoofer amplifiers because of its full-range design.

With adjustable crossover settings, this amplifier can be configured for different types of speaker systems.

High-Output Subwoofer Systems

For bass-focused installations, configure the amplifier's low-pass filter to send the appropriate frequencies to your subwoofers.

With 2,500 watts RMS available at 1 ohm, the FRP-2.5K/TI can power properly matched high-output subwoofer configurations.

Pro Audio Midrange Systems

The amplifier can also be used for compatible high-power midrange loudspeaker systems.

Its adjustable high-pass filter allows installers to limit low-frequency content that could damage speakers not designed to reproduce deep bass.

Custom Full-Range Audio Builds

For custom installations requiring substantial power from a single amplifier channel, the FRP-2.5K/TI offers flexible crossover control.

Important: This is a single-channel amplifier. All connected speakers receive the same mono signal and crossover configuration. It does not provide independent left and right stereo channels.


2,500 Watts RMS of Real Power

The FRP-2.5K/TI delivers different output levels depending on the connected speaker impedance.

Speaker Impedance RMS Power Output
4 Ohms 700 Watts RMS
2 Ohms 1,300 Watts RMS
1 Ohm 2,500 Watts RMS

Maximum Burst Power at 1 Ohm: 2,800 Watts

These ratings allow you to select speakers or subwoofers that match the amplifier's output at your desired impedance.

For example, a properly wired 1-ohm subwoofer system can take advantage of the amplifier's full 2,500-watt RMS rating.

For installations requiring less power, a 2-ohm or 4-ohm configuration provides additional matching options.

Pro Audio Center Tip: Always match amplifier RMS output to your speakers' combined RMS power handling at the actual wired impedance. Do not use maximum or burst power ratings as your primary matching specification.


Full-Range Class D Technology

The FRP-2.5K/TI uses a digital Class D amplifier design engineered to provide high output while maintaining a compact footprint.

Its full-range frequency response of 10Hz–20kHz makes it suitable for a wider range of applications than a subwoofer-only amplifier.

Benefits of Full-Range Amplification

  • Can be configured for bass or higher-frequency speaker applications

  • Supports custom pro audio installations

  • Provides flexible crossover control

  • Delivers substantial power from a compact chassis

  • Allows different speaker configurations when properly matched

This versatility makes the FRP-2.5K/TI particularly appealing for customers building high-output systems with DS18 pro audio speakers.


Adjustable High-Pass & Low-Pass Crossovers

Proper crossover settings are essential for getting the best performance from your speakers.

The FRP-2.5K/TI features adjustable high-pass and low-pass filters that allow you to control which frequencies reach the connected speakers.

High-Pass Filter

Adjustable Range: 10Hz–2kHz

The high-pass filter limits frequencies below the selected crossover point.

This is especially useful when powering midrange speakers that should not receive deep bass frequencies.

Low-Pass Filter

Adjustable Range: 40Hz–20kHz

The low-pass filter limits frequencies above the selected crossover point.

This is useful for subwoofer applications or for setting an upper frequency limit in a custom speaker system.

Band-Pass Configuration

Using the high-pass and low-pass filters together allows the amplifier to operate within a selected frequency band.

This can be useful for high-output midrange systems when the crossover frequencies are properly configured.

Important: The amplifier's crossover range must be appropriate for the connected speakers. High-frequency drivers and tweeters may require additional dedicated crossover protection.


Built for Demanding Car Audio Systems

High-output audio systems place significant demands on an amplifier.

DS18 equips the FRP-2.5K/TI with several features designed to support reliable operation.

Dual Smart Cooling Fans

Two cooling fans help manage operating temperatures during demanding listening sessions.

Protective Circuit Board Coating

The circuit board features a protective coating intended to reduce moisture-related corrosion.

Vibration-Resistant Construction

Bonded components help improve resistance to vibration in mobile audio environments.

Advanced Protection Features

The amplifier includes protection for:

  • Thermal overload

  • Speaker output short circuits

  • Excessive load conditions

  • High and low supply voltage

  • Clipping conditions

These features help protect the amplifier during abnormal operating conditions, although proper installation and tuning remain essential.

Note: Protective coating does not make the amplifier waterproof or marine-rated.


Included Remote Level Control with Clipping Indicator

The FRP-2.5K/TI includes a remote level control designed to provide convenient adjustment from the driver's seat.

The remote also features a clipping indicator, giving you an additional way to monitor the amplifier's operating condition.

Why This Matters

  • Convenient level adjustment

  • Helps monitor clipping

  • Useful for high-output bass systems

  • Allows quick adjustments between different listening preferences

The remote level control is especially convenient for customers using the amplifier to power subwoofers.

An upgraded remote with a voltmeter is available separately.


Compact Titanium Chassis

Despite its substantial power rating, the FRP-2.5K/TI features a compact design that makes installation easier in space-limited vehicles.

Overall Dimensions

  • Length: 8.85"

  • Width: 5.5"

  • Height: 2.36"

The titanium-colored finish provides a distinctive appearance for visible custom amplifier installations.

Its small footprint also makes it practical for installation beneath seats, behind interior panels, or in custom amplifier racks when adequate ventilation and clearance are available.

Important: Allow sufficient airflow around the amplifier and its cooling fans.


High-Current Power Connections

The FRP-2.5K/TI features a 0-gauge power input terminal designed for high-current electrical connections.

DS18 specifies a 200-amp recommended fuse rating.

Because this amplifier can produce up to 2,500 watts RMS, electrical system planning is especially important.

Depending on the vehicle and intended listening demands, supporting upgrades may include:

  • Properly sized OFC power and ground wiring

  • High-quality battery connections

  • Appropriate circuit protection

  • Charging system evaluation

  • Additional battery capacity when required

  • Improved grounding and electrical connections

The correct wiring and fuse configuration should be determined using the amplifier's requirements, cable length, and wire ampacity.


Key Features

  • DS18 FRP Series Full-Range Monoblock Amplifier

  • Model FRP-2.5K/TI

  • Titanium Finish

  • Class D Digital Amplification

  • Single-Channel Full-Range Design

  • 2,500W RMS at 1 Ohm

  • 1,300W RMS at 2 Ohms

  • 700W RMS at 4 Ohms

  • 2,800W Maximum Burst Power at 1 Ohm

  • 1-Ohm Minimum Stable Impedance

  • 10Hz–20kHz Frequency Response

  • Adjustable High-Pass Filter

  • Adjustable Low-Pass Filter

  • Band-Pass Crossover Capability

  • Adjustable Bass Boost

  • Included Remote Level Control

  • Remote Clipping Indicator

  • Power, Protection & Clipping LED Indicators

  • Dual Smart Cooling Fans

  • 0-Gauge Power Input Terminal

  • Tiffany-Style RCA Connections

  • Protective Circuit Board Coating

  • Vibration-Resistant Internal Construction

  • Advanced Protection Circuitry

  • Compact Chassis


Technical Specifications

Specification Details
Brand DS18
Series FRP
Model / SKU FRP-2.5K/TI
Product Type Full-Range Monoblock Amplifier
Color Titanium
Amplifier Class Class D
Number of Channels 1
Minimum Stable Impedance 1 Ohm
RMS Power at 4Ω 700W × 1
RMS Power at 2Ω 1,300W × 1
RMS Power at 1Ω 2,500W × 1
Maximum Burst Power at 1Ω 2,800W
Frequency Response 10Hz–20kHz
Signal-to-Noise Ratio 83 dB
Efficiency at 4Ω 85.6%
Damping Factor 90
Total Harmonic Distortion 0.5%
Input Impedance 10kΩ
Low-Level Input Range 400mV–3.6V
High-Level Input No
High-Pass Filter 10Hz–2kHz
Low-Pass Filter 40Hz–20kHz
Bass Boost 0–12 dB
Bass Boost Frequency 50Hz
Phase Selector No
Remote Level Control Included
Remote Clip Indicator Included
Power Input Terminal 0 Gauge
Recommended Fuse 200A
Cooling System Dual Smart Cooling Fans
Power / Protect / Clip Indicators Yes
Thermal Protection Yes
Short-Circuit Protection Yes
Voltage Protection Yes
Clipping Protection Yes

Physical Dimensions

Measurement Size
Overall Length 8.85" / 225mm
Overall Width 5.5" / 140mm
Overall Height 2.36" / 60mm
Heatsink Length 7.6" / 193mm
Manufacturer-Listed Gross Weight 2.1 kg / Approximately 4.63 lb.

Pro Audio Center Expert Recommendation

The DS18 FRP-2.5K/TI is an excellent choice for customers building a high-output audio system who need substantial power without installing a physically large amplifier.

What makes this model especially appealing is its combination of 2,500 watts RMS at 1 ohm, full-range crossover flexibility, compact construction, and included remote level control with clipping indicator.

For subwoofer installations, it can deliver serious low-frequency power when paired with a properly matched 1-ohm speaker load.

For pro audio applications, its adjustable high-pass and low-pass filters provide the flexibility needed to power compatible midrange speaker systems.

We also appreciate the dual cooling fans and protection features, which are important considerations for an amplifier in this power class.

Our recommendation: Pair the FRP-2.5K/TI with speakers capable of handling its RMS output, use properly sized electrical wiring, and have the amplifier professionally tuned for the best results.

What's Included

  • (1) DS18 FRP-2.5K/TI Full-Range Monoblock Amplifier — Titanium

  • (1) Remote Level Control with Clipping Indicator

  • Manufacturer Documentation

Sold individually. Speakers, subwoofers, amplifier wiring, RCA cables, and installation accessories are sold separately.

Recommended Crossover Settings

Proper crossover settings are especially important when using a high-power full-range amplifier.

The FRP-2.5K/TI provides:

  • High-Pass Filter: 10Hz–2kHz

  • Low-Pass Filter: 40Hz–20kHz

Subwoofer Systems

Suggested starting settings:

Low-Pass Filter: 70–80Hz

High-Pass / Subsonic Filter: Set according to the subwoofer enclosure design.

Bass Boost: Start at 0 dB.

These settings help concentrate amplifier power on low-frequency reproduction.

Pro Audio Midrange Systems

Suggested starting settings:

High-Pass Filter: Follow the speaker manufacturer's recommended crossover frequency.

Low-Pass Filter: Set according to the intended speaker frequency range and system design.

Bass Boost: 0 dB.

For example, a midrange speaker with a recommended 120Hz high-pass crossover should not be operated without appropriate low-frequency protection.

Tweeter Applications

Dedicated tweeters require carefully selected high-frequency crossover protection.

Because the FRP-2.5K/TI's adjustable high-pass filter only extends to 2kHz, it may not provide sufficient protection for tweeters requiring higher crossover frequencies.

Use an appropriate external crossover or DSP when necessary.


Electrical System Requirements

The FRP-2.5K/TI is capable of producing 2,500 watts RMS at 1 ohm, which places significant demands on the vehicle's electrical system.

DS18 specifies:

  • 0-Gauge Power Input Terminal

  • 200-Amp Recommended Fuse Rating

  • Class D Amplifier Design

  • Dual Smart Cooling Fans

Why Buy From Pro Audio Center?

At Pro Audio Center, we understand that high-output amplifiers require careful system planning.

Speaker impedance, RMS power handling, crossover settings, electrical capacity, and installation quality all affect performance.

We're here to help you select the right speakers, wiring, and supporting equipment so your system delivers the power you're looking for reliably.


Frequently Asked Questions

How much power does the DS18 FRP-2.5K/TI produce?

The amplifier is rated for:

  • 2,500W RMS at 1 ohm

  • 1,300W RMS at 2 ohms

  • 700W RMS at 4 ohms

Is the FRP-2.5K/TI a monoblock amplifier?

Yes. It is a single-channel full-range Class D amplifier.

Is it stable at 1 ohm?

Yes. DS18 rates the FRP-2.5K/TI for operation at a minimum 1-ohm load.

Can I use it for subwoofers?

Yes. It can power compatible subwoofer systems when impedance and RMS power handling are properly matched.

Can I use it for DS18 pro audio speakers?

Yes. Its full-range design and adjustable crossover filters make it suitable for compatible high-output midrange speaker systems.

Can I use it for regular door speakers?

Potentially, but its substantial power output and single-channel configuration make it better suited to carefully designed high-output systems.

For a conventional stereo door speaker upgrade, a multi-channel amplifier is generally preferable.

Does it include a bass knob?

Yes. The amplifier includes a remote level control with a clipping indicator.

Does it have a clipping indicator?

Yes. The amplifier has clipping indication, and the included remote also provides a clipping indicator.

Does it have a high-pass crossover?

Yes. The adjustable high-pass filter operates from 10Hz to 2kHz.

Does it have a low-pass crossover?

Yes. The adjustable low-pass filter operates from 40Hz to 20kHz.

Can I run tweeters directly from this amplifier?

Only with appropriate crossover protection and power matching.

Many tweeters require a high-pass frequency above the amplifier's built-in 2kHz limit, so an external crossover or DSP may be necessary.

Does it have speaker-level inputs?

No. The amplifier uses low-level RCA inputs. Factory radio systems without suitable RCA outputs require appropriate signal integration.

What size power wire should I use?

The amplifier has a 0-gauge power input terminal.

We recommend appropriately sized high-quality OFC wiring, with 1/0 AWG often a practical starting point depending on the installation.

What fuse does DS18 recommend?

DS18 lists a 200-amp recommended fuse rating.

The complete installation must also follow proper cable protection and fuse-sizing practices.

Does it have cooling fans?

Yes. The FRP-2.5K/TI includes dual smart cooling fans.

Is the amplifier waterproof?

No. The circuit board has a protective coating, but the amplifier is not classified as waterproof or marine-rated.

Can I bridge this amplifier?

No. It is already a single-channel monoblock amplifier.

Can I connect two speakers to this amplifier?

Yes, provided their combined impedance is at least 1 ohm and their power handling is appropriate.

Both speakers will receive the same mono signal.

Will it work with my factory radio?

Yes, with appropriate signal integration equipment. Because it does not have a dedicated high-level input, many factory systems will require a line output converter or compatible interface.

Do I need an upgraded electrical system?

Possibly. At high output levels, this amplifier can place substantial demands on the vehicle's electrical system.

The need for additional battery capacity or charging system upgrades depends on the vehicle and intended usage.