Skip to content

51LX13007 KICKER LX-Series 1300.7 Premium 7-Channel Car Audio Amplifier Amp 1&2 125Wx4 4 Ohm, 150Wx4 2 Ohm + Amp 3 65Wx2 4 Ohm + Mono 500W 2 Ohm, 700W 1 Ohm

by Kicker
Sold out
Original price $1,049.99
Original price $1,049.99 - Original price $1,049.99
Original price $1,049.99
Current price $949.99
$949.99 - $949.99
Current price $949.99
🚚 Order within the next 2 hours, 15 minutes for delivery by 09 Feb, 2025.
Availability:
Out of stock

LX 1300.7

    The KICKER LX-Series is a perfect marriage of SQL design and high-powered output, utilizing feedback from the industry to deliver the most requested features while maintaining the highest performance possible. All multi-channel amplifiers are bridgeable and come with a wired control center (LXCC). LX Amps with sub sections come with a robust remote level control (LXRC) featuring SHOCwave2.0™.

    From the Ground Up

    The LX-Series represents KICKER’s high-power premium amplifier line designed in-house from the ground up:

    • Incrementally dial in entire system with the included LX Control Center
    • Monitor and adjust sub section with the included LXRC Dash Remote
    • Class-D design for lower current draw, longer playing times, and lower operating temperatures
    • Gain-match LEDs show you perfect gain setting
    • Customize the appearance with reversible center panel and choice of 11 RGB LED accent colors
    • Comes with FIT+™ technology, accepting low- and high-level signals up to 40V, with full differential inputs to eliminate unwanted noise
    • LX features choice of turn-on modes and a bevy of protections for thermal, circuit, and voltage

    Comes with the LX CONTROL CENTER (LXCC)

    • Provides fine-tuning control and diagnostic readouts for battery voltage, amp temperature, and protection status
    • Features DSP control of: gain trim, LED output clip indication, selectable crossover type and slope, variable crossover ranges, KickEQ+™ parametric bass boost (sub section)
    • DSP control of left-channel time delay on stereo channels, and phase control on sub channels

     

    Comes with the LX REMOTE CONTROL (LXRC)

    • Dynamic fingertip dash remote of bass level
    • Features SHOCwave2.0™ (Sub-Harmonic Octave Creation), KICKER’s 2nd-gen digital bass restoration algorithm that recovers lost, low-bass frequencies vital to your music selections
    • Also features battery voltage in fuel-gauge-style readout, control of RGB LED brightness, and output clipping indication

    Specifications

    LX 1300.7 White Paper
    51LX13007 Whitepaper PDF
    RMS Power [Watts/Channel] @ 14.4V
    Amp 1 & Amp 2 (Stereo Channels):
    2Ω Stereo: 150 x 4
    4Ω Stereo: 125 x 4
    4Ω Bridged: 250 x 2

    Amp 3 (Stereo Pair):
    2Ω Stereo: 65 x 2
    4Ω Stereo: 65 x 2
    4Ω Bridged: 130 x 1

    Sub Channel:
    1Ω mono: 700W
    2Ω mono: 550W
    4Ω mono: 300W
    Dynamic Power [Watts]
    1500
    Frequency Response [Hz]
    Stereo Channels: 20–20k
    Sub Channel: 10–160 (+0/-1dB)
    Signal-to-Noise Ratio
    (a-weighted, re: rated power)
    >95dB
    Signal-to-Noise Ratio
    (ref: 1W output)
    >75dB
    Dimensions [in, cm]
    Height: 2-3/8 (6 cm)    Width: 8-7/16 (21.4 cm)
    Length: 12-5/8 (32 cm)
    Input Sensitivity
    High level 1V–40V
    Low level 125mV–5V
    Variable Electronic Crossover
    Amp 1 & Amp 2, Amp 3 (Stereo Channels):
    Off/HP/LP/BP
    HP: 20–5kHz   LP: 40–5kHz
    Sub Channel:
    LP 40–160Hz, 24dB/octave Linkwitz-Riley
    Selectable Topology: 12, 18, or 24dB/oct Butterworth;
    12 or 24dB/oct Linkwitz-Riley
    Variable Subsonic Filter
    24dB/octave Linkwitz-Riley,
    variable hi-pass @ 10–80Hz (sub channel only)
    KickEQ+™ (Sub Channel)
    0–6dB, variable center 20–80Hz,
    variable bandwidth 1–5
    Warranty
    When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase.