KICKER CS Series 6x9" & 3.5" Coaxial Car Speakers Bundle – 4 Speakers | 46CSC6934 + 46CSC354
Upgrade Your Factory Sound With Four KICKER CS Series Speakers
Give your vehicle's audio system an upgrade with the KICKER CS Series 6x9" and 3.5" Coaxial Speaker Bundle. This four-speaker package includes one pair of KICKER 46CSC6934 6x9" 3-way speakers and one pair of KICKER 46CSC354 3.5" 2-way speakers, providing a convenient solution for vehicles equipped with both speaker sizes.
Whether you're replacing worn-out factory speakers or looking for clearer vocals, stronger midbass, and more detailed highs, this KICKER CS Series combination delivers a balanced upgrade with matching speaker technology throughout your system.
The larger 6x9" speakers deliver powerful midbass and full-range sound, while the compact 3.5" speakers provide detailed midrange and high-frequency reproduction in compatible dashboard or other factory speaker locations.
With polypropylene woofer cones, UV-treated foam surrounds, and KICKER's Extended Voice Coil (EVCâ„¢) technology, the CS Series is designed to deliver dependable performance and improved sound quality over many factory audio systems.
What's Included
-
2 × KICKER 46CSC6934 – 6x9" CS Series 3-way coaxial car speakers (1 pair)
-
2 × KICKER 46CSC354 – 3.5" CS Series 2-way coaxial car speakers (1 pair)
Total: 4 speakers / 2 pairs
Both speaker pairs are genuine KICKER CS Series products. Installation adapters, vehicle-specific wiring harnesses, and additional installation accessories are not included unless specifically listed.
KICKER 46CSC6934 – 6x9" 3-Way Speakers
Enjoy powerful, detailed sound with the KICKER CSC693 6x9" 3-way coaxial speakers. Built to deliver impressive output and strong midbass, these speakers make an excellent replacement for compatible factory 6x9" locations.
Key Features
-
6x9" 3-way coaxial speaker design
-
150 watts RMS power handling per speaker
-
450 watts peak power handling per speaker
-
4-ohm impedance
-
92dB sensitivity
-
30Hz–20kHz frequency response
-
Rigid polypropylene woofer cones
-
UV-treated polyester foam surrounds
-
EVCâ„¢ Extended Voice Coil technology
-
Dedicated 2" midrange drivers
-
1/2" PEI balanced-dome tweeters
-
Zero-protrusion tweeter design
-
Durable stamped-steel speaker baskets
-
Protective speaker grilles included
The 3-way design combines a large 6x9" woofer with dedicated midrange and high-frequency drivers to reproduce a broad range of music with clarity and impact.
KICKER 46CSC354 – 3.5" 2-Way Speakers
The KICKER CSC35 3.5" coaxial speakers are designed to bring clearer vocals and detailed highs to compact factory speaker locations.
Their shallow mounting depth and zero-protrusion tweeter design make them a practical choice for many dashboard and other space-limited speaker locations.
Key Features
-
3.5" 2-way coaxial speaker design
-
30 watts RMS power handling per speaker
-
90 watts peak power handling per speaker
-
4-ohm impedance
-
88dB sensitivity
-
80Hz–20kHz frequency response
-
Rigid polypropylene woofer cones
-
UV-treated foam surrounds
-
1/2" PEI balanced-dome tweeters
-
Neodymium tweeter magnets
-
Zero-protrusion tweeter design
-
Compact stamped-steel framework
-
Shallow 1-11/16" mounting depth
The CSC35 speakers complement the larger 6x9" speakers by delivering clear sound from smaller factory locations where larger speakers cannot fit.
Why Upgrade Both Speaker Sizes Together?
Many vehicles use different speaker sizes throughout the factory audio system. Rather than replacing only one pair, this bundle lets you upgrade four compatible speaker locations with matching KICKER CS Series components.
Benefits of this combination include:
-
Matching KICKER sound: Use speakers from the same product series for a more consistent sound character.
-
Improved clarity: Replace aging or underperforming factory speakers with modern coaxial designs.
-
Stronger midbass: The 6x9" speakers provide substantial cone area for fuller midbass reproduction.
-
Detailed vocals and highs: The 3.5" speakers help reproduce music details from compact speaker locations.
-
Flexible installation: Suitable for compatible factory-radio or aftermarket-audio systems.
-
Convenient bundle: Get both speaker pairs in one purchase instead of ordering separately.
Designed for Factory Speaker Replacement
KICKER CS Series speakers are engineered for broad vehicle compatibility, with shallow mounting profiles and zero-protrusion tweeters that help accommodate many factory speaker locations.
This bundle is particularly useful for vehicles that use 6x9" speakers in their doors and 3.5" speakers in dashboard locations.
However, speaker fitment varies by vehicle, trim level, factory audio package, and installation location. Some installations may require speaker adapters, mounting brackets, wiring harnesses, or modifications.
Important: This is a universal speaker bundle, not a guaranteed direct-fit package for any particular vehicle. Always verify speaker sizes, mounting clearances, factory impedance, and audio-system compatibility before ordering.
Amplifier and Factory Radio Compatibility
Both speaker models feature a nominal 4-ohm impedance and can be used with compatible factory radios, aftermarket head units, or external amplifiers.
The 6x9" speakers support up to 150 watts RMS each, while the 3.5" speakers support up to 30 watts RMS each.
Because the two speaker sizes have different power-handling capabilities, amplifier power and crossover settings should be matched to each speaker pair independently.
For the 3.5" speakers, appropriate high-pass filtering is especially important to prevent excessive low-frequency content from reaching the smaller drivers.
Technical Specifications
KICKER 46CSC6934 – 6x9" Speakers
| Specification | Details |
|---|---|
| Series | CS Series |
| Model | CSC693 |
| Part Number | 46CSC6934 |
| Speaker Size | 6x9" |
| Design | 3-Way Coaxial |
| Quantity | 2 Speakers |
| Impedance | 4 Ohms |
| Recommended RMS Power | 10–150W each |
| Peak Power | 450W each |
| Sensitivity | 92dB (1W/1m) |
| Frequency Response | 30Hz–20kHz |
| Midrange Driver | 2" |
| Tweeter | 1/2" PEI |
| Mounting Depth | 3-3/16" |
| Mounting Hole | 5-5/8" × 8-7/16" |
| Grilles | Included |
KICKER 46CSC354 – 3.5" Speakers
| Specification | Details |
|---|---|
| Series | CS Series |
| Model | CSC35 |
| Part Number | 46CSC354 |
| Speaker Size | 3.5" |
| Design | 2-Way Coaxial |
| Quantity | 2 Speakers |
| Impedance | 4 Ohms |
| Recommended RMS Power | 10–30W each |
| Peak Power | 90W each |
| Sensitivity | 88dB (1W/1m) |
| Frequency Response | 80Hz–20kHz |
| Tweeter | 1/2" PEI |
| Mounting Depth | 1-11/16" |
| Mounting Diameter | 3" |
| Grilles | Not Included |
Frequently Asked Questions
How many speakers come with this bundle?
This bundle includes four individual speakers: two KICKER 46CSC6934 6x9" speakers and two KICKER 46CSC354 3.5" speakers.
Are these all KICKER CS Series speakers?
Yes. Both pairs are genuine KICKER CS Series coaxial speakers, designed for improved sound quality and durability compared with many factory speakers.
Will these speakers fit my Dodge Ram truck?
Some Dodge Ram and Ram trucks use 6x9" and 3.5" speaker locations, making this combination a potential upgrade option. Exact fitment depends on the model year, cab configuration, factory audio system, and speaker location. Verify compatibility before ordering.
Can I install these with my factory radio?
Yes, provided your factory audio system is compatible with 4-ohm aftermarket speakers. Some factory amplified systems use different speaker impedances or signal processing, so compatibility should be checked before installation.
Do I need an amplifier?
Not necessarily. These speakers can operate from compatible factory or aftermarket head units. An appropriately configured external amplifier may provide additional output and control.
Are the 6x9" speakers 3-way?
Yes. The 46CSC6934 speakers feature a 3-way design with a woofer, dedicated midrange driver, and tweeter.
Are the 3.5" speakers 2-way?
Yes. The 46CSC354 speakers are 2-way coaxial speakers with integrated tweeters.
Do these include plug-and-play wiring harnesses?
No. Vehicle-specific wiring harnesses and installation adapters are not included in this bundle.
Can I connect the 6x9" and 3.5" speakers to the same amplifier channel?
These speakers have different power-handling capabilities and should be connected using an appropriate system configuration. Do not simply parallel both speakers onto one channel without verifying the amplifier's impedance requirements, crossover configuration, and speaker protection.
Will these speakers work in my vehicle's dashboard and doors?
They may be suitable for vehicles with compatible 3.5" dashboard locations and 6x9" door locations. Check your vehicle's exact speaker sizes and mounting requirements before ordering.
Expert Recommendation
The KICKER 46CSC6934 and 46CSC354 bundle is an excellent choice for customers who want to upgrade multiple factory speaker locations using matching KICKER CS Series speakers.
The 6x9" speakers provide strong midbass and full-range output, while the compact 3.5" speakers add clarity and detail in compatible smaller speaker locations.
For the best results, verify your vehicle's factory speaker configuration, use the appropriate wiring adapters, and configure any external amplifier or crossover settings to match the different power-handling requirements of each speaker pair.
This is a practical, high-quality upgrade for customers who want better sound without purchasing a completely custom audio system.